Animal Surgical Equipment Accessories
Instech Stainless steel catheter / tubing coupler, 20ga x 15mm. Nonsterile. Package of 100.
The Instech SC20/15 is a stainless steel catheter coupler used to connect implanted catheters to external infusion tubing. Sized at 20ga and 15mm in length, it provides a secure, low‑dead‑volume junction for reliable fluid transfer in infusion or sampling setups. The rounded edges reduce the risk of tubing damage, and the couplers are supplied non‑sterile in packages of 100 for laboratory use.
Features
- 20ga stainless steel straight catheter coupler
- 15mm length for secure catheter‑to‑tubing connection
- Rounded edges to protect tubing during use
- Non‑sterile; packaged in sets of 100
- Used to connect catheters to external infusion lines
IV bag spike and 30in extension set with pinch clamp ending in male luer. Connects saline bag to sampler tubing on Instech ABS1 and ABS2 automated blood samplers. Sterile.
The Instech ABS2/IVEXT is a sterile IV bag spike and 30in extension set designed to connect a saline bag to the sampler tubing on Automated Blood Samplers™ (ABS1™ and ABS2™). Its integrated pinch clamp and male luer fitting provide controlled flow adjustment and a secure connection for reliable IV fluid delivery during automated sampling workflows.
Features
- Sterile IV bag spike with 30in extension tubing
- Integrated pinch clamp for flow control
- Ends in male luer for secure sampler connection
- Interfaces with ABS1 and ABS2 sampler tubing
- Supports consistent IV fluid delivery during studies
Instech Syringe rack kit, microliter rack for Harvard Apparatus PHD Ultra pumps
The HA3022A (70-3022A) is an Add-on Microdialysis Syringe Rack for immediate installation on a new Harvard Apparatus PHD ULTRA syringe pump at the time of initial purchase.
Features
Instech Luer stub, 15ga (amber) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS15 is a non‑sterile 15‑gauge amber luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS15 is supplied non‑sterile in a pack of 100 for routine infusion and sampling workflows.
Features
- Gauge: 15ga (amber hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
Instech Low-flow peristaltic pump, 900:1 motor delivers flow rates from 8-2400l/min.
P720 Peristaltic Pumps
Instech P720 peristaltic pumps deliver the low flow rates of syringe pumps without the limits on delivered volume. They are ideal for tissue perfusion and other low-flow laboratory applications.
The 900:1 motor delivers flow rates from 8-2400l/min depending on tube set size installed. Order tube sets separately. Universal power adapter included.
Features
- Precise. Precision-machined pump heads, Swiss-made motor and gearhead assemblies, linear speed control, and a range of tube sizes deliver flow rates from 0.8 µL/min to 18 ml/min (0.05 to 1100 ml/hour) with an accuracy better than ±5%.
- Small. The pumps fit in the palm of your hand and weigh about one pound.
- Versatile. Pre-assembled tube sets are available with your choice of three tubing materials, nine types of connectors, and one or two channels.
Instech Luer stub, 23ga (orange) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS23 is a non‑sterile 23‑gauge orange luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS23 is supplied non‑sterile in a pack of 100 for routine infusion and sampling workflows.
Features
- Gauge: 23ga (orange hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
Instech Luer stub, 22ga (blue) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS22 is a non‑sterile 22‑gauge blue luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS22 is supplied non‑sterile in a pack of 100 for general infusion and sampling workflows.
Features
- Gauge: 22ga (blue hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
SAI Infusion Technologies Sterile Blunt Needles, 27G, 1.5"", 25/pack
This item has a minimum qty of 3 per supplier requirements.
27G1.5 Blunt Needles with plastic hub and stainless steel blunt needle. Blunt tip needles are useful for a variety of laboratory tasks, including connection to indwelling catheters. SAI's smooth, burr-free stainless steel needles prevent damage to the lumen of the catheter during dosing, sampling, flushing or locking. These needles are sterile and individually packaged, 25/pk. Non-sterile blunt needles also available. Product is for laboratory animal research only. ** If a COA is required it must be requested when the order is placed or a $50.00 fee will be apply. Contact Thermo Fisher Customer Service at 800-766-7000 to request to COA. **
Colonial Medical Supply Co Inc F/AIR Canister, Absorbs Halogenated Anesthetic Gases, Non-Hazardous Design, 8 Canisters/Case
The F/AIR Canister is a disposable anesthesia gas filter solution designed to efficiently eliminate waste anesthetic gases (WAGs) in medical and veterinary settings. Using activated carbon, it effectively absorbs halogenated anesthetic agents, thus enhancing safety by releasing purified air. Its compact design allows for easy storage, and the canister's passive scavenging system simplifies post-procedure cleanup.
Med Vet International Thyroid X-Ray Collar, J0678N, Each
New style Thyroid Collar offers a trim yet shielded and comfortable design. Includes binding and rear hook and loop closure. 25.5” length, 10 x 5.5” Bib.• Standard protection: 0.5mm Pb Equivalency• Royal blue nylon(Please specify color combinations. This item is a special order and non-returnable.)
Med Vet International Sympathy Cards, Canine Galaxy, 10/Pack, J1483A
These beautiful sympathy cards are a nice gesture in reaching out to clients after they have suffered the loss of a pet. They are 5 x 7 heavy card and blank inside for a personalized note. Drawing by Canadian artist and veterinary technician, Ve?ronique Jean 10 cards w/envelopes Sympathy Cards, Canine Galaxy
Med Vet International Jorvet Nylon Muzzle, Small, for Pug Nosed Dogs, J0169PS
The Jorvet small nylon muzzle for pug nosed dogs is a comfortable and lightweight muzzle. It has a side easy-release snap buckle and adjustable straps for a snug fit. This borders of this muzzle are reinforced with webbing to make this a long lasting muzzle.
Braintree Scientific DecapiCones for Rats, 4 Dispensers, 50 Cones/ea
Make injections and decapitation quicker and easier with Braintree Scientific's DecapiCones. Tapered plastic film tubes provide quick and easy restraint of rats, mice, and other small animals. I.P. injections can be made directly through the film! DecapiCones restrain post-decapitation kicking and prevent personal contact with feces or urine. A unique dispenser holds DecapiCones open and ready for use. Simply hold the DecapiCone in one hand and introduce the animal with the other. Animals enter readily, heading for the breathing hole at the small end. Roll and squeeze the large end closed. They may be used repeatedly for injections and simply discarded when soiled. For decapitation, hold at the rear and insert the small end into the decapitator. **Sold for research purposes only and not for human use**